Videos & Blog
MEM Heat Press
How to Replace the Piston on an MEM TQA-4050 Heat Press β Full Step-by-Step Repair
Is your MEM TQA-4050 heat press constantly hissing air even after replacing the solenoid? You may be dealing with a worn piston. In this step-by-step guide, learn how to replace the pneumatic pisto...
MEM Heat Press
Troubleshooting: Heat Press Stuck in Lowered Position
If your heat press is stuck in the down position, especially on semi-automatic models, itβs often due to incomplete engagement during the pressing cycle. This guide explains the root cause of the i...
MEM Heat Press
Make Your Heat Press Mobile! π οΈπ₯
Tired of lifting your heat press? Learn how to add caster wheels to your MEM stand for smooth, easy movementβno heavy lifting required!
MEM Heat Press
Unlocking the MEM control Panel
Follow the steps in this post to unlock your control panel.
MEM Heat Press
Unboxing and Assembling your TQA-4050
Max is here to assist you with the unboxing process of your new TQA-4050 heat press. Please note that these instructions are also relevant for the TQB-4050 heat press.